Zero Air generators

The VICI DBS GC Zero Air Generator utilizes compressed air that is prefiltered to 5 microns and then purified using a state of the art combined heated catalyst module.
The output zero grade air is free from total hydrocarbons to <0.1 ppm, making it ideal for all FID applications. This gas purity level (measured as methane) guarantees a low signal to noise ratio, ensuring a flat and stable GC baseline.

With no moving parts and silent operation, the generator is extremely reliable and ideal to be installed directly in the laboratory. With flow rates up to 30 L/min, one system can support up to 75 FIDs.

With short payback time, minimal maintenance and operator attention they are an ideal addition to any GC laboratory.

GC Plus Zero Air generators:

Zero Air generators use three steps to transform ambient air into analytical grade air.

Pre-Filtration:

The external oil-free compressor delivers air through a high-efficiency filter removing any particles or aerosols which may damage the system. The filter has an automatic drain system, removes oil, water, and any other particles larger than 5 microns in size.

HC & CO Trapping:

The air leaving the filter enters a high-temperature platinum catalyzer, through which oxidation eliminates all hydrocarbon molecules down to <0.1 ppm.

Final Filtration:

A high-efficiency polishing filter is used to prevent any kind of particles from entering the instrument.


                                                                                                             

GC Plus Rack Zero Air generators:


In addition to wall mounting, GC Zero Air generators are also available as 19" rack units with the same quality as usual for VICI DBS. With flow rates up to 15 L/min, one system can support up to 33 FIDs.

                                                                                                       

GT Plus Ultra Zero Air generators:

The VICI DBS GT Plus Ultra Zero Air Generator utilizes compressed air that is purified using a five-step conditioning process.
The output zero grade air is free from THC, CO, CO2, NOx, SOx, Ozone, and water vapor, making it ideal for all analyzer, TOC, and specialist detector applications.

Ultra-Zero Air generators use five steps to transform ambient air into analytical grade air.

Pre-Filtration:

The external air supply is prefiltered by high efficiency coalescing filters to remove water, oil, and particulate.

Drying & Trapping:

The self-regenerative PSA drying module removes water vapor and CO2.

NOx, SOx & O3 Elimination:

A unique, specifically designed scrubber removes NOX & SOX and Ozone.

HC & CO Trapping:

The air leaving the filter enters a high-temperature platinum catalyzer, which through oxidation eliminates THC and CO.

Final Filtration:

A high-efficiency polishing filter is used to ensure the exit zero air is free from all particulate.

                                                                                                                         


For more information contact us here.
More in this category: « Nitrogen generators